| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authentication issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2. A malicious app may be able to access Bluetooth without user consent. |
| A privilege escalation issue was discovered in Rancher Manager's role-based access control. The inheritedNamespacedRules field of a GlobalRole propagates permissions into named namespaces of every downstream cluster managed by the Rancher instance, but it was not subject to the privilege-escalation validation applied to the other permission-carrying fields of a GlobalRole. As a result, a non-administrative user could be granted, through a global role binding, permissions in downstream clusters that exceed the permissions that user already holds. This affected SUSE Rancher 2.15.2 only, and SUSE Rancher Webhook 0.11.0 up to 0.11.4, and 0.12.0 up to 0.12.1. |
| Munshi (by Petpooja) before 2026-06-30 contained a payment bypass vulnerability in its subscription payment webhook at POST /api/payment/order/webhook, which lacks webhook authentication, cryptographic signature verification, source validation, and independent server-side confirmation with the payment provider. A remote, unauthenticated attacker can submit a forged payment-success notification referencing an order obtained from the payment-status redirect URL, causing the backend to mark the subscription as paid/active and granting paid access without an actual successful payment. |
| Control Web Panel (CWP) before webpanel_version 1.30 contains a missing authentication vulnerability that allows attackers able to reach the loopback API service to invoke root-privileged API routes without presenting an access token. Attackers can access endpoints such as /v1/restoredatabase/, /generaluser/, /last_access/, /valid_user/, /valid_token/, and /user_panel_dashboard/ to perform unauthorized actions with root privileges. |
| Coop is an open source review and moderation tool from ROOST. Prior to 1.0.0, an unauthenticated actor can query `Query.allOrgs` through `/api/v1/graphql` on a publicly accessible deployment and obtain data for all organizations, including organization IDs, names, email addresses, website URLs and on-call alert email addresses. The `usersWhoCanReviewEveryQueue` field also exposes reviewing users' IDs, email addresses, first and last names, roles, permissions and creation dates. Running the service on an authenticated private network prevents outside actors from directly querying the GraphQL API. This issue is fixed in version 1.0.0. |
| A vulnerability was detected in WAVLINK WN536AX6-A V260507_2.0.0. Impacted is the function sub_416d48/sub_41a7c0 of the file /bin/ioos of the component VPN Client List Handler. Performing a manipulation of the argument opt results in missing authentication. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| A weakness has been identified in Presenton up to 0.9.11-beta. Affected by this issue is some unknown functionality of the component API. This manipulation causes missing authentication. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 0.9.12-beta can resolve this issue. Patch name: 44c8a61122b21f17642d717b0c4d6f2c54c0f180. You should upgrade the affected component. |
| danmu_api before 1.21.7 contains an authentication bypass vulnerability that allows unauthenticated attackers to modify server environment configuration when the default TOKEN is used and ADMIN_TOKEN is unset. Attackers can send POST requests to /api/env/set, /api/env/add, or /api/env/del to set ADMIN_TOKEN, lock out operators, redirect OTHER_SERVER or PROXY_URL for SSRF, and trigger redeployment. |
| A vulnerability was found in 777genius agent-teams-ai up to 2.17.10. This issue affects the function doStart of the file src/main/services/infrastructure/HttpServer.ts of the component Local HTTP Service. The manipulation results in missing authentication. The attack is only possible with local access. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A firmware verification vulnerability in Creative Sound
Blaster Katana could allow an attacker to modify a legitimate firmware image
and upload the modified firmware to an affected device. |
| A vulnerability was found in GiantappMan LiveWallPaper 2.6.8.0 on Windows. This issue affects some unknown processing of the file /LiveWallpaper/UploadFile of the component SignalR Hub. Performing a manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The patch is named b62f878899adbfc2968e3345442f3a3df91b774d. It is suggested to install a patch to address this issue. The vendor was contacted early about this disclosure. |
| madong-admin-saas through 5.1.4 contains a missing authentication vulnerability in the platform tenant management API because the 'platformapi' middleware key never matches the 'platform' application. Unauthenticated remote attackers can call /platformapi/tenant/account, bind-plan and sync-data endpoints to list, create, modify, disable or delete tenants and bind subscription plans. |
| The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message().
The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte datagram carrying the transport-data type, zeroed reserved bytes and an arbitrary receiver index is sufficient. The vulnerable branch runs whenever the peer has neither a valid handshake nor a current keypair — the state at boot and after a session expires.
A single spoofed datagram redirects peer->endpoint to an address of the attacker's choosing, and all subsequent handshake initiations, keepalives and encrypted data packets are sent there. The legitimate peer never receives the initiations and so never re-authenticates, and nothing resets the endpoint afterwards, leaving the tunnel persistently unusable on devices whose peer does not initiate handshakes itself. The attacker can also relay the redirected initiations to the real peer to place itself in the path of the tunnel, observing ciphertext and traffic metadata and selectively dropping packets. WireGuard's end-to-end cryptography still prevents decryption or forgery of tunnel content, so the impact is loss of availability plus limited confidentiality, not key compromise.
The fix removes the endpoint learning from this path entirely: the stale-session recovery is kept, but the handshake is sent only to an endpoint learnt from an authenticated message, falling back to the configured cfg_endpoint, and the message is dropped when neither is known. CONFIG_WIREGUARD is marked experimental and is not enabled by default. |
| An authentication bypass vulnerability in the public onPhase/ frevvo registration form version 11.0.14 allows an unauthenticated remote attacker to authenticate as an arbitrary tenant user, obtain TenantAdmin and Designer privileges, and execute arbitrary operating system commands via manipulation of registration parameters containing a valid tenant name and existing user identifier. |
| Missing Origin Validation in WebSockets (CWE-1385) and Permissive Cross-domain Policy with Untrusted Domains (CWE-942) in the development web server (ADK Web) in Google Agent Development Kit (ADK) for Java (com.google.adk:google-adk-dev versions 0.1.0 before 1.13.0 and com.google.adk:google-adk-maven-plugin versions 0.3.0 before 1.13.0) allow a remote attacker to control a locally running agent and read its data via a malicious web page visited by a developer while the server is running. The /run_live WebSocket endpoint accepts connections from any origin by default (hardcoded via setAllowedOrigins("*") in versions 0.1.0 through 1.5.0, and defaulting to * via adk.web.cors.origins in versions 1.6.0 through 1.12.0), and since version 0.4.0 the REST API returns Access-Control-Allow-Origin: * by default. Because the server has no authentication and requests originate from the developer's browser (so binding to localhost does not prevent exploitation), a cross-origin page can send messages to the agent (triggering registered tools), stream agent responses, and list, read, create, or delete sessions and artifacts. In versions 1.6.0 through 1.12.0, users can mitigate the issue by setting the adk.web.cors.origins property to an explicit allowlist of trusted origins (such as http://localhost:8000). The vulnerability is fixed in version 1.13.0, which enforces a same-origin default for CORS and the /run_live WebSocket endpoint, and rejects DNS-rebinding requests over loopback. |
| A flaw was found in FreeIPA. The self-managed OTP token ACI does not require authentication and does not restrict which attributes may be added alongside the token entry. An unauthenticated LDAP client can exploit this, combined with a related flaw in the underlying directory server's ACI evaluation (tracked separately), to create an arbitrary attacker-controlled Kerberos principal and have it added to the administrators group. This allows a remote, unauthenticated attacker to obtain genuine FreeIPA administrator-group membership and perform administrative operations against the directory and, on SID-enabled deployments, other IdM services. |
| Network-AI from 5.14.0 before 5.15.5 contains a missing authentication vulnerability in the A2AServer class that allows unauthenticated attackers to access task operations when no secret is configured. Attackers can send JSON-RPC requests to tasks/send, tasks/get, and tasks/cancel without a Bearer token to execute tasks, read results, and cancel tasks. |
| A flaw was found in Red Hat Quay's exported logs feature. An unauthenticated attacker with a valid file ID could download exported action logs without proper authorization. While file IDs are complex, they can be intercepted from plaintext email or webhook callbacks. This vulnerability leads to information disclosure, potentially exposing sensitive data such as usernames, email addresses, IP addresses, and action-specific metadata. |
| A flaw was found in EAP's IIOP. The listener's NameService would accept bind operations without authentication, allowing an attacker to hijack JNDI lookups and binding them to a malicious ORB, achieving MITM or DoS on further invocations. |
| A vulnerability was determined in BillaBear up to 2025.01.03. Affected by this issue is the function processInstall of the file src/BillaBear/Controller/InstallController.php of the component Installation Handler. This manipulation causes missing authentication. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
