| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on CRIU restore queue type and mqd size
We weren't checking whether the values provided in the private
data in kfd CRIU restore were within bounds.
For queue type, add a KFD_QUEUE_TYPE_MAX and ensure the provided
type is less than it.
For mqd_size, add new function mqd_size_from_queue_type and confirm
that the provided mqd_size matches expectations.
(cherry picked from commit f19d8086f6644083c913d70bfdeee20e1b6f46a5) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: challenge ACK for non-exact RST in SYN-RECEIVED
The SYN-RECEIVED request-socket path in tcp_check_req() accepts an
in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A
non-exact RST therefore removes the request instead of eliciting a
challenge ACK.
RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in
SYN-RECEIVED: an exact RST resets the connection, while a non-exact
in-window RST must trigger a challenge ACK and be dropped.
Apply that check before the ACK-field validation, following the RFC
sequence-number, RST, then ACK processing order. Factor the per-netns
challenge ACK quota out of tcp_send_challenge_ack() so request sockets
can share it. Use the request socket's send_ack() callback and its own
out-of-window ACK timestamp to send and rate-limit the response. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.5 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit efc9dd5590894109bce9a0bfe1fa5592dd6b20b1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations.
Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime.
An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker.
Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed()
cxl_payload_from_user_allowed() casts and dereferences the input
payload without first verifying its size. When a raw mailbox command
is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG,
which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer,
triggering a KASAN splat:
BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683
Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258
CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xce/0x650 mm/kasan/report.c:482
kasan_report+0xce/0x100 mm/kasan/report.c:595
memcmp+0x176/0x1d0 lib/string.c:683
uuid_equal include/linux/uuid.h:73 [inline]
cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline]
cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline]
cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline]
cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643
__cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline]
cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdaf331ba79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79
RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003
RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768
</TASK>
Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate
the payload is large enough. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: wait barrier before returning discard request with REQ_NOWAIT
raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix hang while freeing sigtrap event
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers
While using nvme target with use_srq on, below kernel panic is noticed.
[ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514)
[ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
..
[ 566.393799] <TASK>
[ 566.393807] ? __die_body+0x1a/0x60
[ 566.393823] ? die+0x38/0x60
[ 566.393835] ? do_trap+0xe4/0x110
[ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393881] ? do_error_trap+0x7c/0x120
[ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393911] ? exc_divide_error+0x34/0x50
[ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393939] ? asm_exc_divide_error+0x16/0x20
[ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re]
[ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re]
[ 566.394057] ? srso_return_thunk+0x5/0x5f
[ 566.394068] ? __init_swait_queue_head+0x4a/0x60
[ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core]
[ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma]
[ 566.394174] ? lock_release+0x22c/0x3f0
[ 566.394187] ? srso_return_thunk+0x5/0x5f
Page size and shift info is set only for the user space SRQs.
Set page size and page shift for kernel space SRQs also. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: clear uffd-wp PTE/PMD state on mremap()
When mremap()ing a memory region previously registered with userfaultfd as
write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in
flag clearing leads to a mismatch between the vma flags (which have
uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp
cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to
trigger a warning in page_table_check_pte_flags() due to setting the pte
to writable while uffd-wp is still set.
Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any
such mremap() so that the values are consistent with the existing clearing
of VM_UFFD_WP. Be careful to clear the logical flag regardless of its
physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE,
huge PMD and hugetlb paths. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
While running ISER over SIW, the initiator machine encounters a warning
from skb_splice_from_iter() indicating that a slab page is being used in
send_page. To address this, it is better to add a sendpage_ok() check
within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag
should be disabled before entering the network stack.
A similar issue has been discussed for NVMe in this thread:
https://lore.kernel.org/all/[email protected]/
WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320
Call Trace:
tcp_sendmsg_locked+0x368/0xe40
siw_tx_hdt+0x695/0xa40 [siw]
siw_qp_sq_process+0x102/0xb00 [siw]
siw_sq_resume+0x39/0x110 [siw]
siw_run_sq+0x74/0x160 [siw]
kthread+0xd2/0x100
ret_from_fork+0x34/0x40
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
If the value of max_speed_hz is 0, it may cause a division by zero
error in hisi_calc_effective_speed().
The value of max_speed_hz is provided by firmware.
Firmware is generally considered as a trusted domain. However, as
division by zero errors can cause system failure, for defense measure,
the value of max_speed is validated here. So 0 is regarded as invalid
and an error code is returned. |
