| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count.
Root Cause:
The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts.
Affected Scenarios:
Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3451
Note:
No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software. |
| Print Assumptions does not report that a definition was produced while universe checking was disabled when that definition reaches the caller through Parameter Inline in a module type. Applying a functor inlines the body of the parameter, and the inlining drops the record that the term was built under Unset Universe Checking, so the resulting constant carries no trace of the unsafe operation. A module implementation can therefore prove False using a universe inconsistency, expose it through an inlined parameter, and have Print Assumptions report the dependent proof as closed under the global context. Because Print Assumptions is the in-process audit used to confirm that a development rests on no unexpected assumptions, a dependency built this way passes that audit while proving arbitrary propositions. The standalone checker coqchk does reject the resulting compiled file. The project records this in dev/doc/critical-bugs.md under non-fixed bugs and rates the risk as moderate when coqchk is not used. |
| An issue was discovered in LibreNMS 1.65. A remote authenticated attacker with normal privileges can execute arbitrary shell commands through a command injection in the /graph.php API endpoint. |
| GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the set_config function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection. |
| GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the string port parameter in the enable_echo_server function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| NVIDIA UFM Enterprise contains a vulnerability in the IBDiagnet API where an authenticated attacker with administrative privileges may cause command injection by sending crafted API requests. A successful exploit of this vulnerability may lead to code execution, escalation of privileges and information disclosure. |
| GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the module parameter in the M.get_system_log function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| ImageMagick before 7.1.2-33 contains a memory leak vulnerability in the MAT decoder that fails to release allocated memory in a specific error path. Attackers can supply crafted MAT files that trigger this error path repeatedly, causing small memory leaks that gradually consume process memory. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak on error descriptor
When the error bit is set in the RX completion descriptor, the buf_state
and its attached buffer should be freed. In the case of AF_XDP ZC, the
XSK buffer was not freed, leading to a leak.
This issue was caught by LLM. |
| Uncontrolled resource consumption in RPC Endpoint Mapper Service allows an unauthorized attacker to deny service over a network. |
| OW2 ASM 3.0 before 9.11 contains a quadratic memory allocation vulnerability in MethodWriter.computeMaxStackAndLocal() and computeAllFrames() when using COMPUTE_MAXS or COMPUTE_FRAMES. Attackers can supply a crafted class file with thousands of overlapping exception handlers, causing excessive Edge allocations and an OutOfMemoryError that crashes the JVM. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix objects stuck in free_by_rcu_ttrace
do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set
and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees
waiting_for_gp_ttrace only and clears the flag. Hence the objects that
free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight
stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for
the same bpf_mem_cache again, which may never happen. The number of such
objects is not bounded.
Turn call_rcu_ttrace_in_progress into three states:
0 - idle
1 - __free_rcu() is queued
2 - __free_rcu() is queued and free_by_rcu_ttrace got more objects since
do_call_rcu_ttrace() sets 2. __free_rcu() does cmpxchg(1 -> 0) and starts
the next GP when it fails. It cannot clear the flag first and check
free_by_rcu_ttrace later, since bpf_mem_alloc_destroy() frees bpf_mem_cache
without waiting for RCU callbacks when the flag is zero.
Now __free_rcu() queues itself, so the one that didn't see 'draining' may
do call_rcu_tasks_trace() after rcu_barrier_tasks_trace() in
free_mem_alloc(). Queue it under rcu_read_lock() and do synchronize_rcu()
before the barriers. Calling rcu_barrier_tasks_trace() twice works too, but
creating and destroying hash maps in a loop on many cpus slows down to one
free_mem_alloc() per GP and kworkers pile up. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.conch.telnet.Telnet.dataReceived appends every byte received after IAC SB to a persistent subnegotiation buffer until IAC SE is received, without applying a maximum length. Telnet option negotiation occurs before authentication, so an unauthenticated peer can omit the terminator and continuously grow the buffer. The resulting memory exhaustion can terminate the process and every service it hosts. This issue is fixed in version 26.10.0rc1. |
| GraphQL-core is a Python port of the GraphQL.js reference implementation. From 3.0.0 until 3.2.12 and 3.3.0rc1, the OverlappingFieldsCanBeMerged rule in specified_rules repeatedly compares fields that share response names and recursively re-compares flattened inline fragments during the validation phase. The prior named-fragment memoization does not cover this path, so nested repeated inline fragments can drive quadratic and worst-case O(n²·m²) CPU work before any resolver or AST-based depth or complexity control runs. An unauthenticated remote attacker can submit a shallow, highly compressible GraphQL query that pins a worker process and can saturate a multi-worker service. This issue is fixed in versions 3.2.12 and 3.3.0rc1. |
| Apache Traffic Server 9.2.15, 10.1.4 and 10.2.0 write one unthrottled diagnostic log line for every internal @ header they strip, so a request carrying many such headers makes the proxy write far more log data than the request contains.
This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. Prior to 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0, XmlScanner::scan in src/PhpSpreadsheet/Reader/Security/XmlScanner.php uses a DOCTYPE detection pattern that accounts for NUL-byte interleaving but not ISO-2022 escape sequences in XLSX XML parts. The escape sequences prevent the scanner from matching the declaration, and XML charset normalization then removes the escape bytes before parsing, exposing a valid DOCTYPE and entity definitions. Processing an attacker-controlled XLSX can therefore cause entity-expansion denial of service on supported PHP versions and can permit local file access or SSRF on PHP before 8.0 or when LIBXML_NOENT is enabled. This issue is fixed in versions 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. From 3.3.0 until 3.10.8 and 5.10.0, Reader\Xml passes stored SpreadsheetML XML through XmlScanner::scan in Xml::canRead and Xml::trySimpleXMLLoadStringPrivate, while Xml::unentity decodes numeric entities only after each DOCTYPE pattern check. A double-encoded less-than character is reduced by the first callback to another encoded character and by the second callback to a literal less-than sign, so SimpleXML receives an unchecked DOCTYPE and entity declaration. Processing attacker-controlled SpreadsheetML XML can cause entity-expansion denial of service and can permit local file access or SSRF on PHP before 8.0 or when LIBXML_NOENT is enabled. This issue is fixed in versions 3.10.8 and 5.10.0. |
