| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| cjwt is a C JSON Web Token (JWT) Implementation. Algorithm confusion occurs when a system improperly verifies the type of signature used, allowing attackers to exploit the lack of distinction between signing methods. If the system doesn't differentiate between an HMAC signed token and an RS/EC/PS signed token during verification, it becomes vulnerable to this kind of attack. For instance, an attacker could craft a token with the alg field set to "HS256" while the server expects an asymmetric algorithm like "RS256". The server might mistakenly use the wrong verification method, such as using a public key as the HMAC secret, leading to unauthorised access. For RSA, the key can be computed from a few signatures. For Elliptic Curve (EC), two potential keys can be recovered from one signature. This can be used to bypass the signature mechanism if an application relies on asymmetrically signed tokens. This issue has been addressed in version 2.3.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improper verification of cryptographic signature during installation of a VPN driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| Improper verification of cryptographic signature during installation of a Printer driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| ABB is aware of privately reported vulnerabilities in the product versions referenced in this CVE. An attacker could exploit these vulnerabilities by sending a specially crafted firmware or configuration to the system node, causing the node to stop, become inaccessible, or allowing the attacker to take control of the node. |
| A flaw exists in the SAML signature validation method within the Keycloak XMLSignatureUtil class. The method incorrectly determines whether a SAML signature is for the full document or only for specific assertions based on the position of the signature in the XML document, rather than the Reference element used to specify the signed element. This flaw allows attackers to create crafted responses that can bypass the validation, potentially leading to privilege escalation or impersonation attacks. |
| aes-gcm is a pure Rust implementation of the AES-GCM. In decrypt_in_place_detached, the decrypted ciphertext (which is the correct ciphertext) is exposed even if the tag is incorrect. This is because in decrypt_inplace in asconcore.rs, tag verification causes an error to be returned with the plaintext contents still in buffer. The vulnerability is fixed in 0.4.3. |
| An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity. |
| A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Improper authentication in the API authentication middleware of HCL DevOps Loop allows authentication tokens to be accepted without proper validation of their expiration and cryptographic signature. As a result, an attacker could potentially use expired or tampered tokens to gain unauthorized access to sensitive resources and perform actions with elevated privileges. |
| Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| ALTCHA is privacy-first software for captcha and bot protection. A cryptographic semantic binding flaw in ALTCHA libraries allows challenge payload splicing, which may enable replay attacks. The HMAC signature does not unambiguously bind challenge parameters to the nonce, allowing an attacker to reinterpret a valid proof-of-work submission with a modified expiration value. This may allow previously solved challenges to be reused beyond their intended lifetime, depending on server-side replay handling and deployment assumptions. The vulnerability primarily impacts abuse-prevention mechanisms such as rate limiting and bot mitigation. It does not directly affect data confidentiality or integrity. This issue has been addressed by enforcing explicit semantic separation between challenge parameters and the nonce during HMAC computation. Users are advised to upgrade to patched versions, which include version 1.0.0 of the altcha Golang package, version 1.0.0 of the altcha Rubygem, version 1.0.0 of the altcha pip package, version 1.0.0 of the altcha Erlang package, version 1.4.1 of the altcha-lib npm package, version 1.3.1 of the altcha-org/altcha Composer package, and version 1.3.0 of the org.altcha:altcha Maven package. As a mitigation, implementations may append a delimiter to the end of the `salt` value prior to HMAC computation (for example, `<salt>?expires=<time>&`). This prevents ambiguity between parameters and the nonce and is backward-compatible with existing implementations, as the delimiter is treated as a standard URL parameter separator. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image. |
| xml-crypto is an XML digital signature and encryption library for Node.js. An attacker may be able to exploit a vulnerability in versions prior to 6.0.1, 3.2.1, and 2.1.6 to bypass authentication or authorization mechanisms in systems that rely on xml-crypto for verifying signed XML documents. The vulnerability allows an attacker to modify a valid signed XML message in a way that still passes signature verification checks. For example, it could be used to alter critical identity or access control attributes, enabling an attacker to escalate privileges or impersonate another user. Users of versions 6.0.0 and prior should upgrade to version 6.0.1 to receive a fix. Those who are still using v2.x or v3.x should upgrade to patched versions 2.1.6 or 3.2.1, respectively. |
