| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the PathResourceManager component of the Undertow web server. This component is responsible for serving static files from the file system. The issue occurs because the mechanism used to verify if a symbolic link points to a safe location only checks if the target path starts with a specific string, without ensuring it matches a full directory name. This could allow an attacker to access files in a sibling directory if that directorys name starts with the same characters as an authorized safe directory. |
| The StreamsHub Console operator acts as a confused deputy: a Kubernetes tenant with permission to create a Console custom resource can set spec.kafkaClusters[].credentials.kafkaUser.namespace to any namespace. The operator, running with cluster-wide Secrets RBAC, reads the victim-namespace KafkaUser Secret (SASL credentials or TLS private keys) and writes the plaintext material into a Secret in the attacker's namespace. No same-namespace check or allowlist exists anywhere in the code path. |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| A flaw was found in libtirpc. A remote attacker can exploit this vulnerability by sending specially crafted PMAPPROC_DUMP replies to a client application that uses the pmap_getmaps() function against an attacker-controlled host. This unbounded decoding can lead to excessive memory and CPU allocation, causing the client process to experience a Denial of Service (DoS) due to resource exhaustion. |
| A flaw was found in parted. A heap-based buffer overflow can occur when processing a specially crafted FAT32 filesystem due to an integer calculation error during buffer allocation. A local attacker could exploit this by enticing a user or automated service to open a malicious filesystem image, resulting in an application crash leading to a Denial of Service (DoS) or potential memory corruption. |
| An authorization bypass was found in the Ansible Automation Platform (AAP) gateway. The gateway API allows an authenticated administrator to create a new service key for the Controller service cluster. Because service-key creation is not restricted to the installer-provisioned provisioning path, an administrator-issued key is cryptographically indistinguishable from a legitimate one and can be used to forge a service-authentication token that impersonates the Controller service. Combined with the gateway OIDC workload-identity endpoint (enabled via FEATURE_OIDC_WORKLOAD_IDENTITY_ENABLED), the attacker can drive the gateway to sign Workload Identity Tokens (WITs) for arbitrary Controller workloads. A downstream resource server such as HashiCorp Vault that trusts the gateway OIDC key will accept the forged WIT and return the AAP credentials bound to that workload, disclosing secrets beyond the attacker's authorization boundary. |
| A path traversal vulnerability was found in pulpcore. The content upload API accepts a 'file_url' parameter that allows users with file repository privileges to specify a local file URL for Pulp to download and store. A URL scheme validation check uses a string prefix comparison that only rejects URLs beginning with 'file://', but Python's URL parser recognizes the 'file:' scheme without double slashes, creating a mismatch between what is validated and what is dispatched to the file downloader. An authenticated user with low-privilege repository permissions can supply a specially crafted URL using relative path traversal sequences to read any file accessible to the Pulp server process. In deployments that include Pulp Container, successful exploitation allows an attacker to read the container registry token signing private key and forge bearer tokens, granting unauthorized access to all private container repositories in the affected registry. |
| A flaw was found in parted. A heap-based buffer overflow exists in libparted's file system resizing logic when handling FAT16 volumes. By convincing a user or administrator to resize a specially crafted FAT16 file system image with malformed directory metadata, an attacker can trigger an oversized read into a fixed-size memory buffer. This issue causes memory corruption, resulting in an application crash and a denial of service (DoS). |
| A flaw was found in nfs-utils. An unauthenticated remote attacker can trigger a Denial of Service (DoS) by sending repeated state notification requests to an exposed rpc.statd service. The service fails to properly release memory allocated during callback processing, leading to continuous memory growth. Sustained requests can exhaust system resources, eventually causing the service to degrade or crash. |
| Red Hat Product Security has determined that this is not a vulnerability in bootc or containers-common. bootc fetches images under /etc/containers/policy.json. The shipped default is insecureAcceptAnything for registries without an explicit signature requirement; registry.redhat.io and registry.access.redhat.com require signatures. Updating a mutable tag requires the ability to publish to the reference an administrator has already configured the host to follow. Requiring signatures is available through that policy and through bootc enforce-container-sigpolicy, which is off by default. Persistence of /var across bootc rollback is expected image-mode behavior. |
| A flaw was found in bootc and ostree. Already-staged deployments are finalized without revalidating the deployment's container image against the current containers signature policy. Unsigned OS content staged under a prior permissive policy can remain bootable after policy is hardened to reject unsigned images, leading to full host compromise on reboot. |
| A flaw was found in the GStreamer ASF demuxer in gst-plugins-ugly. When parsing a Simple Index object, an attacker-controlled entry count is used to size a heap allocation without being limited to the payload available in the object. Processing a crafted ASF, WMV, or WMA file can cause a very large memory allocation request and lead to denial of service if the allocation fails or the process is memory-constrained. |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. |
| A stack-based buffer overflow flaw was found in fetchmail when built with NTLM support. A malicious or compromised mail server advertising NTLM authentication can send a crafted Type 2 challenge that causes fetchmail to write past a fixed stack buffer while building the NTLM authenticate response. This may lead to remote code execution depending on stack-frame layout, or to authentication failure or process termination under memory hardening. |
| This candidate was rejected after further investigation determined that it is not a security vulnerability. The client certificate chain is validated during mTLS negotiation at the TLS layer or reverse proxy before Keycloak processes CRL Distribution Point or OCSP URLs, so only certificates issued by a CA explicitly trusted by the administrator can trigger these requests. |
| A flaw was found in cockpit-machines. This vulnerability allows a local attacker to expose sensitive Virtual Machine (VM) credentials, including plaintext passwords, by inspecting process command-line arguments during VM creation or installation. The cockpit-machines component passes password values directly on the command line, making them visible to other local users on systems where process arguments are not restricted. Successful exploitation leads to information disclosure, potentially compromising VM access. |
| A flaw was found in cockpit-machines. This vulnerability allows a local attacker with the ability to inspect process metadata to disclose a sensitive Red Hat Subscription Management (RHSM) offline token. The token is exposed when it is passed as a command-line argument to a helper script during the token validation process. Successful exploitation could lead to the compromise of confidentiality, as the exposed token can be used to request access tokens. |
| A flaw was found in `cockpit-machines`. This vulnerability allows a local attacker with the ability to inspect running processes to expose sensitive guest virtual machine (VM) credentials, such as `rootPassword` and `userPassword`. This occurs when the `install_machine.py` script passes these credentials as a JSON command-line argument during VM creation or installation. The exposure is limited to the period when the installation workflow is active and depends on host process-visibility policies. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: imx6: Fix suspend/resume support on i.MX6QDL
The suspend/resume functionality is currently broken on the i.MX6QDL
platform, as documented in the NXP errata (ERR005723):
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
This patch addresses the issue by sharing most of the suspend/resume
sequences used by other i.MX devices, while avoiding modifications to
critical registers that disrupt the PCIe functionality. It targets the
same problem as the following downstream commit:
https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995
Unlike the downstream commit, this patch also resets the connected PCIe
device if possible. Without this reset, certain drivers, such as ath10k
or iwlwifi, will crash on resume. The device reset is also done by the
driver on other i.MX platforms, making this patch consistent with
existing practices.
Upon resuming, the kernel will hang and display an error. Here's an
example of the error encountered with the ath10k driver:
ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible
Unhandled fault: imprecise external abort (0x1406) at 0x0106f944
Without this patch, suspend/resume will fail on i.MX6QDL devices if a
PCIe device is connected.
[kwilczynski: commit log, added tag for stable releases] |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: change folios array from kmalloc to kvmalloc
When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine,
page_alloc only support 4MB.
If above this, trigger this warn and return NULL.
udmabuf can change size limit, if change it to 3072(3GB), and then alloc
3GB udmabuf, will fail create.
[ 4080.876581] ------------[ cut here ]------------
[ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350
[ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350
[ 4080.879470] Call Trace:
[ 4080.879473] <TASK>
[ 4080.879473] ? __alloc_pages+0x2c8/0x350
[ 4080.879475] ? __warn.cold+0x8e/0xe8
[ 4080.880647] ? __alloc_pages+0x2c8/0x350
[ 4080.880909] ? report_bug+0xff/0x140
[ 4080.881175] ? handle_bug+0x3c/0x80
[ 4080.881556] ? exc_invalid_op+0x17/0x70
[ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20
[ 4080.882077] ? udmabuf_create+0x131/0x400
Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB
memory, each array entry is pointer(8byte), so can save 524288 pages(2GB).
Further more, costly order(order 3) may not be guaranteed that it can be
applied for, due to fragmentation.
This patch change udmabuf array use kvmalloc_array, this can fallback
alloc into vmalloc, which can guarantee allocation for any size and does
not affect the performance of kmalloc allocations. |
