| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take the reference before publishing the named histogram trigger
event_hist_trigger_named_init() puts the trigger on the global
named_triggers list and only then takes the reference on the trigger it
shares its histogram with:
data->ref++;
save_named_trigger(data->named_data->name, data);
ret = event_hist_trigger_init(data->named_data);
if (ret < 0) {
kfree(data->cmd_ops);
data->cmd_ops = &trigger_hist_cmd;
}
return ret;
event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and
nothing takes the trigger back off the list on the way out.
event_hist_trigger_parse() frees it, and the next lookup by name reads the
freed object:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff888009346860 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 67:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Do the reference first and publish once it has succeeded, so that nothing
which can fail runs after the trigger becomes findable. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file->triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: cc2520: fix FIFOP work use-after-free
The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal,
cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ
remains active until after ->remove() returns and can queue the work
again after that flush, allowing it to run after the private data is
released.
Disable the work with disable_work_sync() instead of flushing it, so
the handler can no longer queue it once removal begins. Destroy the
buffer mutex last, since the worker and the stop callback invoked
through ieee802154_unregister_hw() both take it.
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix P2P-Device binding handling
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: quiesce DMA before freeing resources
pdsc_teardown() frees DMA buffers but does not disable bus mastering,
leaving the device able to perform DMA after the buffers are freed.
This can lead to use-after-free if the device writes to freed memory.
Add pci_clear_master() to pdsc_teardown() to disable bus mastering
before freeing resources, ensuring all DMA is quiesced.
Add pci_set_master() to pdsc_setup() to re-enable bus mastering,
which is needed for the firmware recovery path since pdsc_teardown()
now disables it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb()
look up the dmb_node under dmb_ht_lock, drop the lock and only then
operate on the node's refcount. Nothing keeps the node alive across
that window: __dibs_lo_unregister_dmb() removes the node from the hash
table under the write lock and immediately frees it.
A concurrent final put can therefore free the node between the lookup
and the refcount operation:
CPU0 (attach) CPU1 (owner unregisters)
read_lock_bh(&dmb_ht_lock)
find dmb_node (refcnt == 1)
read_unlock_bh(&dmb_ht_lock)
refcount_dec_and_test() 1 -> 0
write_lock_bh(&dmb_ht_lock)
hash_del(&dmb_node->list)
write_unlock_bh(&dmb_ht_lock)
kfree(dmb_node)
refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free
The same window exists for the refcount_dec_and_test() calls in the
detach and unregister paths.
Close the race structurally by making hash table membership and the
refcount transitions atomic with respect to each other:
- Perform the final refcount_dec_and_test() and hash_del() in a single
dmb_ht_lock write-side critical section, in both the unregister and
the detach path. Freeing the node still happens after the lock is
dropped, which is safe because a node whose refcount reached zero has
left the hash table and can no longer be found.
- This establishes the invariant that any node found in the hash table
holds at least one reference, and that the final reference can only
be dropped under the write lock. dibs_lo_attach_dmb() can thus take
its reference with a plain refcount_inc() while still holding the
read lock; refcount_inc_not_zero() is no longer needed.
__dibs_lo_unregister_dmb() no longer touches the hash table and is
renamed to dibs_lo_free_dmb() accordingly.
Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved
the code to its current location; the race was introduced earlier by
commit c3a910f2380f ("net/smc: implement DMB-merged operations of
loopback-ism").
Tested SMC-D via ISM and dibs loopback. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear rb node linkage when freeing bpf_rb_root
bpf_rb_root_free() detaches the root by copying the current rb_root_cached
and then replacing the live root with RB_ROOT_CACHED. It then walks the
copied root and drops each object contained in the tree.
This leaves the rb node state intact while dropping the object. If the
object is refcounted and survives the drop, its bpf_rb_node_kern still
contains an owner pointer to the freed root and stale rb tree linkage. If
a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove()
can incorrectly pass the owner check and call rb_erase_cached() on a node
whose rb pointers belong to the old tree.
Mirror the list draining behavior by marking nodes as busy while the root
is being detached, then clear the rb node and release the owner before
dropping the containing object. This makes surviving nodes unowned and
safe to reject from remove or accept for a later add. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on probe failure
The vub300 driver lifetime-manages its controller state using
vub300->kref, with vub300_delete() freeing the mmc host when the last
reference is dropped. The probe error path after the inactivity timer has
been armed still bypasses that lifetime rule, however, and falls through
to mmc_free_host() directly if mmc_add_host() fails.
The race window is between arming the inactivity timer and reaching the
probe error unwind after mmc_add_host() fails:
probe thread timer/workqueue
------------ ---------------
kref_init(&vub300->kref) ref = 1
kref_get(&vub300->kref) ref = 2, timer ref
add_timer(inactivity_timer) fires after one second
|
| race window
|<---------------------------------------------------->
|
mmc_add_host(mmc)
inactivity timer fires
vub300_queue_dead_work()
kref_get() ref = 3
queue_work(deadwork)
mmc_add_host() fails
timer_delete_sync()
mmc_free_host(mmc)
frees vub300
deadwork runs
use-after-free
The inactivity timeout is one second, so this would require
mmc_add_host() to both fail and take more than one second to do so. This
is unlikely to happen in practice, but the error path is still wrong.
timer_delete_sync() only waits for the timer callback itself. It does
not flush deadwork that the callback may already have queued. As a
result, queued deadwork can still hold a kref while the probe error path
directly frees the backing mmc host, including the vub300 storage.
Fix this by using the same lifetime mechanism as disconnect. Clear
vub300->interface so that the timer callback and any queued deadwork
return early and drop their references, then drop the initial probe
reference and return without falling through to err_free_host. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix Endpoint Memory Access Descriptor offset calculation
Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: extend conn_hash lookup critical sections
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix use-after-free on workqueue during remove
In pdsc_remove(), the workqueue is destroyed before pdsc_teardown()
is called. This ordering allows two paths to queue work on the
destroyed workqueue:
1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error
path in pdsc_devcmd_locked() queues health_work.
2. A NotifyQ event can trigger the ISR and queue work before free_irq()
is called in pdsc_teardown().
Fix by moving destroy_workqueue() after pdsc_teardown() so the
workqueue outlives every queuer; destroy_workqueue() then flushes any
work still pending.
Draining the queued work also requires ordering the teardown so the
resources that work touches are freed last:
- In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync()
the queue's work and only then clear qcq->intx, so
pdsc_process_adminq()'s read of qcq->intx for interrupt-credit
return cannot race with the clear.
- Free adminqcq before notifyqcq: the shared adminq ISR is released
when adminqcq is freed, and the adminq work accesses notifyqcq, so
both must be stopped before notifyqcq is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
