| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing validation of "valuesFrom" references in Helm Deployer of SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.15 could be used by owners of one tenant to access fleet credentials of other tenants. |
| Unauthenticated Arbitrary Code Execution in W3 Total Cache <= 2.9.4 versions. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of XMLTable-derived columns. |
| A data corruption vulnerability has been identified in the luksmeta utility when used with the LUKS1 disk encryption format. An attacker with the necessary permissions can exploit this flaw by writing a large amount of metadata to an encrypted device. The utility fails to correctly validate the available space, causing the metadata to overwrite and corrupt the user's encrypted data. This action leads to a permanent loss of the stored information. Devices using the LUKS formats other than LUKS1 are not affected by this issue. |
| Unauthenticated Multiple Vulnerabilities in BitFire Security <= 5.0.3 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: validate qr_numregions in dlm_match_regions()
Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".
In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:
- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-of-bounds reads past
the 1024-byte qr_regions buffer.
- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop,
which uses '<=' instead of '<', reading one entry past the valid range
even when qr_numregions is within bounds.
This patch (of 2):
The qr_numregions field from a DLM_QUERY_REGION network message is used
directly as loop bounds in dlm_match_regions() without checking against
O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS
(32) entries, a crafted message with qr_numregions > 32 causes
out-of-bounds reads past the qr_regions buffer.
Add a bounds check for qr_numregions before entering the loops. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...
[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.
[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. |
| The webp decoder can panic when processing a VP8 chunk with dimensions that do not match the canvas size. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp VBIOS HDMI retimer register count to array size
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
(cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4. |
| Unauthenticated Other Vulnerability Type in WpEvently <= 5.3.3 versions. |
| Unauthenticated Other Vulnerability Type in WP Travel Engine <= 6.7.10 versions. |
| A flaw was found in Keycloak. A remote attacker with high privileges, such as a realm administrator configuring a malicious Lightweight Directory Access Protocol (LDAP) server or an attacker compromising an upstream LDAP server, could exploit this vulnerability. By sending a malformed LDAP password policy response during a password authentication request, the attacker can trigger an OutOfMemoryError. This causes the Keycloak Java Virtual Machine (JVM) to terminate, leading to a denial of service (DoS) for all realms on the affected node. |
| A flaw was found in Keycloak. An authenticated user with low privileges can exploit this vulnerability by sending an oversized subject_token JSON Web Token (JWT) to the TokenEndpoint. When the token exceeds a 4000-character limit, it is silently dropped, causing the system to fall back to client credentials. This allows the user to gain the permissions of the client's service account, leading to privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.6, unchecked passwords maximums allow for an arbitrarily large password to be passed into the login API. This spikes CPU and memory, and after testing, crashes, heavily lags any container created, and has even made my docker daemon start to send errors with status code 500 even after the container was destroyed. This vulnerability is fixed in 2.63.6. |
