| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: fix NULL-pointer dereference in pwrseq_device_register()
If dev_set_name() fails in pwrseq_device_register(), we jump to the
err_put_pwrseq label before initializing pwrseq->targets.
pwrseq_release() will try to iterate over targets unconditionally and
subsequently dereference an invalid pointer. Move the call to
dev_set_name() after the list head is initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
If devm_kcalloc() for rx_chn->flows fails in a channel request function,
the error path calls k3_udma_glue_release_rx_chn(), which dereferences
the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow().
Skip the flow release loop in k3_udma_glue_release_rx_chn() when
rx_chn->flows is not allocated.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| Assimp through 6.0.5 contains a NULL pointer dereference vulnerability in the Ogre3D importer that allows attackers to crash applications via unvalidated bone indices in OgreStructs.cpp. Attackers can supply a crafted .mesh and .skeleton file referencing a missing bone, causing BoneById() to return null and crash the host process. |
| MongoDB Server's collection validation feature may not properly handle certain expressions stored in a validator. In some cases, this can cause the server process to stop running when a document is later inserted. The behavior can occur for authenticated users with write access. |
| OpenPrinting CUPS before 2.4.20 contains a NULL pointer dereference in cupsdCheckJobs() when a job marked job-held-on-create refers to a temporary printer that has been automatically deleted. Temporary-printer cleanup can remove the destination without canceling its held jobs, and the scheduler dereferences the NULL result of cupsdFindDest() while checking holding_new_jobs. This terminates cupsd and interrupts all queues managed by that process. In some plausible scenarios, an unprivileged submission can trigger this. |
| Substance3D - Designer is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| libvterm through 0+bzr726, as used in Vim and other products, mishandles certain out-of-memory conditions, leading to a denial of service (application crash), related to screen.c, state.c, and vterm.c. |
| An issue was discovered in JasPer 2.0.14. There is a NULL pointer dereference in the function jp2_decode in libjasper/jp2/jp2_dec.c, leading to a denial of service. |
| FreeRDP from 2.0.0 before 3.32.0 contains a null pointer dereference vulnerability that allows malicious RDP servers to crash clients by sending out-of-lifecycle serial IRPs. Attackers can send IRP_MJ_READ or IRP_MJ_WRITE before create or after close, causing CommReadFile or CommWriteFile to dereference a null handle and terminate clients using Linux serial redirection. |
| FreeRDP versions from 3.0.0 before 3.32.0 contain a null pointer dereference in the rdpsnd channel when a fragment sets CHANNEL_FLAG_LAST without CHANNEL_FLAG_FIRST. A malicious RDP server can send a malformed rdpsnd PDU on a fresh channel to crash the client and cause denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: ffa: Add NULL check in optee_ffa_lend_protmem
Sashiko (locally) reports a possible null dereference under memory
pressure due to the lack of validation of the allocated pointer.
Fix that by adding the missing check. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject user command submission without a command BO
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon
This patch is based on a BUG as reported by Bongani Hlope at
https://lore.kernel.org/all/[email protected]/
When a channel-switch announcement (CSA) beacon is received,
cfg80211 queues a wiphy work item that eventually calls
mt7921_channel_switch_rx_beacon(). If the station disconnects
(or the channel context is otherwise torn down) between the
time the work is queued and the time it runs, the driver's
dev->new_ctx pointer can already have been cleared to NULL.
mt7921_channel_switch_rx_beacon() then dereferences new_ctx
unconditionally, triggering a NULL pointer dereference at
address 0x0:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common]
The same missing guard exists in mt7925_channel_switch_rx_beacon(),
which shares the same code pattern introduced by the same commit.
Add an early-return NULL check for dev->new_ctx in both
mt7921_channel_switch_rx_beacon() and
mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is
no pending channel switch to process, so returning immediately is
the correct and safe action.
Oops-Analysis: http://oops.fenrus.org/reports/lkml/[email protected]/report.html |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix potential NULL pointer deref in error path of ice_set_ringparam()
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix crash when destroying a suspended hardware context
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix NULL pointer dereference of mgmt_chann
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it. |
