| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A logic issue was addressed with improved checks. This issue is fixed in iOS 18.7.11 and iPadOS 18.7.11, iOS 26.6.1 and iPadOS 26.6.1, macOS Sequoia 15.8, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. An app may be able to leak sensitive user information. |
| Mitigation bypass in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. |
| Mitigation bypass in the File Handling component. This vulnerability was fixed in Firefox ESR 153.5 and Thunderbird 153.5. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2. An app may be able to cause unexpected system termination. |
| destructive_command_guard (dcg) is a command-line safety tool that blocks destructive shell commands before AI coding agents run them. Prior to 0.6.6, nested or unclosed substitutions are recursively rescanned after an inner scan returns unterminated, producing exponential-time work. The affected scanners are reached through split_command_segments in src/packs/mod.rs. a destructive command followed by nested or unclosed $( or $(( sequences. nested or unclosed $( and $(( sequences cause repeated rescanning of the remaining command suffix. a hung PreToolUse hook fails open, allowing the destructive command to proceed. This issue is fixed in version 0.6.6. |
| SOEM version 2.0.0 and earlier contains a vulnerability where a malicious device can crash the master system. When the software receives an error response, it clears an internal pointer but continues processing. If another message arrives before timeout, the software attempts to use the cleared pointer, causing a crash. An attacker can trigger this with a simple sequence of two messages. |
| Vulnerability in the Oracle Java SE, Oracle JavaFX, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JavaFX). Supported versions that are affected are Oracle Java SE: 8u503; Oracle JavaFX: 21.0.12, 25.0.4 and 27; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle JavaFX, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Java SE, Oracle JavaFX, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N). |
| Vyper 0.4.0b1 through 0.5.0b1 miscompiles unfoldable constants and omitted default arguments from imported modules, because parse_Name resolves their names in the using function's scope rather than at declaration. When a contract's parameter, local, or loop variable shares such a name, attacker-influenced input can replace the intended value, including out-of-range values for narrow types such as uint8, corrupting validation or accounting logic. |
| GitPython is a python library used to interact with Git repositories. Prior to 3.2.1, create_submodule() in git/objects/submodule/base.py accepts an attacker-influenced submodule path such as .git/hooks and invokes _clone_repo() before safely rejecting the destination. In 3.1.x, _validate_repo_path() does not exist and the call succeeds silently, while in 3.2.0 and later affected revisions the check in git/index/base.py raises ValueError only after the clone has written to disk and does not remove the planted file. An attacker-controlled submodule can therefore place an executable post-checkout hook that a later Git operation executes. Exploitation requires an application to accept an untrusted submodule path and a clone destination such as .git/hooks that is empty enough for Git to clone into it, which commonly means that default sample hooks are absent. This issue is fixed in version 3.2.1. |
| The Profile Builder WordPress plugin from 4.0.0 to 4.0.4 does not enforce its reCAPTCHA verification on all comment submission paths, allowing authenticated users to bypass the anti-spam protection an administrator configured for the WordPress comment form. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix manual hash table handle IDR aliasing
A u32 hash table created with an explicit handle ('tc filter add ...
handle 801: u32 divisor N') keys its IDR entry on the raw handle, while
the destroy paths free it under handle2id(handle). The two key domains
disagree for handles in the 0x800..0xFFF htid range:
handle2id() folds them back into the auto-allocated id space (1..0x7FF).
A manual table therefore leaves its raw-keyed IDR entry unreachable on
delete (a permanent leak), and its delete can drop the idr entry of an
unrelated live auto table. A later auto allocation can then hand out a
handle that aliases the live manual table; u32_lookup_ht() first-match
routes lookups and TCA_U32_LINK for that htid to the wrong table.
Key the divisor-path alloc on handle2id(handle) so allocation and
removal share one key domain. A manual handle that maps onto an id
already in use is rejected with -ENOSPC, and auto allocation skips ids
held by live manual tables.
Conditions to recreate:
ip link add test0 type dummy
tc qdisc add dev test0 clsact
tc filter add dev test0 ingress protocol ip pref 1 \
handle 801: u32 divisor 16
tc filter add dev test0 ingress protocol ip pref 2 u32 divisor 16
tc -d filter show dev test0 ingress | grep 'fh 801:'
# unpatched: two live tables with handle 0x80100000 (the pref 2 root
# hnode is auto-allocated id 1); patched: the auto hnode takes id 2.
Also tested with a poc with a live u32 table on the block, add/delete a manual
table 'handle 901: u32 divisor 1' twice; unpatched, the re-add fails with
-ENOSPC because the raw key leaked on the first delete. |
| Gitea's OpenID connect handler accepts a user's password without enforcing enrolled TOTP or WebAuthn verification before completing sign-in and linking an OpenID identifier. When OpenID sign-in is enabled, an attacker who knows the victim's password can obtain a session and link an attacker-controlled identifier. The attacker can then sign in through that identifier without the victim's password or second factor, and a password change does not remove the link. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76528 are related to protection mechanism failure and are grouped under the Common Weakness Enumeration (CWE) CWE-693. |
| vLLM before 0.31.0 uses a client-supplied multimodal uuid verbatim as cache identity with no consistency check on cache hits, allowing engine crashes. Unauthenticated attackers can desynchronize the P0/P1 processor caches to trigger a fatal token-placeholder mismatch, killing the entire serving instance until restarted. |
| A vulnerability was detected in radareorg radare2 6.2.0/6.2.2. This issue affects the function r_core_cmd_str_pipe in the library libr/core/rtr_http.inc.c of the component HTTP Sandbox Policy Handler. Performing a manipulation results in protection mechanism failure. Remote exploitation of the attack is possible. The attack is considered to have high complexity. The exploitability is assessed as difficult. Upgrading to version 6.2.4 is capable of addressing this issue. The patch is named 18fd12efa98a7d1977de7bdd379d8a848777b90f. Upgrading the affected component is recommended. The pre-requisite of the vulnerability is reflected by the CVSS vector. One of the project maintainers explains: "There is a real sandbox configuration issue here, but the report overstates it. The HTTP server defaults to http.sandbox=true, so commands received through /cmd temporarily enable cfg.sandbox. However, cfg.sandbox.grain defaults to all, which means all sandbox capabilities - including exec - remain allowed. Therefore enabling the HTTP sandbox alone does NOT prevent commands from spawning processes. This only matters when the HTTP command endpoint is reachable by someone you do not trust. It is not a remote vulnerability by default: the HTTP server must first be started and exposed to the attacker." |
| OGNL is an Object Graph Navigation Library for Java. Prior to 3.4.13, the optional stricter-invocation mode in OgnlRuntime.invokeMethod checks the declaring class of the method that OGNL invokes but does not block java.lang.reflect.Method, java.lang.reflect.Constructor, or java.lang.reflect.Field. An attacker-controlled expression can invoke one of these reflection objects as a proxy for a method on a blocked class, causing the real operation to execute inside JDK reflection without passing through the stricter-invocation check again. Exploitation requires an application to evaluate untrusted OGNL expressions, use the default or an equivalently permissive MemberAccess that permits reflection, and rely on stricter invocation as a sandbox. Applications using a restrictive MemberAccess, including Apache Struts with SecurityMemberAccess, are not affected by this bypass. This issue is fixed in 3.4.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ip_gre: Reject enabling collect metadata through changelink
ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP
or ERSPAN device. Unlike newlink, changelink does not enforce metadata
tunnel uniqueness. Converting a non-metadata device can therefore
replace the metadata receive entry for another device of the same type
in the same netns. Deleting either device then clears the shared entry,
breaking metadata receive lookup for the surviving device.
If parameter validation fails after collect_md is set, deleting the
modified device can also clear an entry it never owned.
Reject enabling metadata mode in both changelink callbacks before any
encapsulation or tunnel parameters are modified. Allow requests that
repeat the metadata attribute on an existing metadata device. |
| Bandisoft Bandizip before 7.47 fails to propagate Mark-of-the-Web to extracted .ps1 and .psm1 files, allowing attackers to bypass zone-based execution protections. Attackers can deliver unsigned PowerShell scripts or modules in downloaded archives that run under the RemoteSigned policy when the user invokes them. |
| A vulnerability has been found in Dolibarr up to 23.0.2. The impacted element is an unknown function of the file htdocs/document.php of the component CSP. Such manipulation leads to protection mechanism failure. The attack can be executed remotely. Upgrading to version 24.0.0 is sufficient to resolve this issue. The name of the patch is 9f9ffa288d4ad2632c1d5dd88272c699a592f4ec. You should upgrade the affected component. |
| A flaw was found in Quarkus. This issue occurs when receiving a request over websocket with no role-based permission specified on the GraphQL operation, Quarkus processes the request without authentication despite the endpoint being secured. This can allow an attacker to access information and functionality outside of normal granted API permissions. |
