| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in Shanghai Xi Yu Ji Zhi Technology Minimax Code 0.5.8. This affects an unknown part of the component Find Command Handler. The manipulation of the argument -exec results in os command injection. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in WAVLINK WN553X1-B V260403_2.0.0. This issue affects the function sub_41A748 of the file /bin/ioos of the component WireGuard CLI Group Handler. Executing a manipulation of the argument group_id/group_name can lead to os command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure. |
| A vulnerability was found in WAVLINK WN553X1-B V260403_2.0.0. This vulnerability affects the function sub_419DA8 of the file /bin/ioos of the component WireGuard CLI Handler. Performing a manipulation of the argument file_id results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This affects the function sub_4162A8 of the file /bin/ioos of the component ovpn_file Handler. Such manipulation of the argument file_id leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability was determined in WAVLINK WN553X1-B V260403_2.0.0. The affected element is the function sub_416568 of the file /bin/ioos of the component OpenVPN CLI Handler. This manipulation of the argument file_id causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in WAVLINK WN553X1-B 260403_2.0.0. This issue affects the function sub_416B50 of the file /bin/ioos. The manipulation of the argument file_id leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. |
| A flaw has been found in WAVLINK WN553X1-B V260403_2.0.0. This vulnerability affects the function sub_416D88 of the file /bin/ioos of the component ioos Service. Executing a manipulation of the argument group_id/group_name can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure. |
| A flaw has been found in WAVLINK WL-WN530HG4B M_V260724. This impacts the function port_forward of the file /cgi-bin/wapi.cgi. This manipulation of the argument Name causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability was detected in WAVLINK WN579X3-D V250402. This affects the function port_forward of the file /cgi-bin/wapi.cgi. The manipulation of the argument Name results in os command injection. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in WAVLINK WL-WN579A3-A 2026-03-10-94f93d4. The impacted element is the function set_wzdgwMesh of the file /cgi-bin/adm.cgi of the component Initial Setup Wizard. The manipulation of the argument wlan_ssid leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix slab corruption from undersized DMA bounce buffers
Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for
ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers
with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but
maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e.
rounded up to the cache line size. As a result, the DMA API operates on
memory beyond the end of the allocation.
This was observed on a custom i.MX8MP platform with an mcp251xfd CAN
controller under heavy RPMSG load, as a series of refcount_t warnings
triggered from rpmsg_recv_done() in virtio_rpmsg_bus:
refcount_t: addition on 0; use-after-free.
refcount_t: underflow; use-after-free.
refcount_t: saturated; leaking memory.
Leading finally to an "Unable to handle kernel paging request" oops.
Reproducing this problem took between 30 minutes and roughly 30 hours
under the same workload.
Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed
it was overwritten from 2 to 1 by __pi_memcpy_generic() in the
irq/155-spi2.0 thread. Additionally it was found that a "normal"
rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In
the error case the same sequence took about 215µs +/-10µs. Based on
this, an LLM was used to identify the size mismatch fixed here.
Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover
the full mapped length, and use the same length for
dma_sync_single_for_cpu() to stay consistent with map and unmap.
With this patch applied, the same workload ran for more than 200 hours
without the problem reproducing. |
| GNU mtools before 4.0.50 has an out-of-bounds write in parse_vses in vfat.c. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the predicate limit separate from program capacity
predicate_parse() adds two to nr_preds to reserve the terminal TRUE
and FALSE entries. It also uses that increased value as the limit for
parsed predicates. If the initial count is smaller than the number
actually parsed, the program can fill the allocation and subsequent
accesses can go past its end.
Keep nr_preds as the predicate limit and use a separate value for the
allocation size. This leaves space for both terminal entries and a
zeroed entry when parsing stops at the limit. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in cifs_do_set_acl()
cifs_set_acl() validates ACL size using posix_acl_xattr_size():
4 + (count * 8) // 4-byte header + 8 bytes per ACE
cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS
wire format into the same buffer:
6 + (count * 10) // 6-byte header + 10 bytes per ACE
An ACL that passes the xattr-based check in cifs_set_acl() can
overflow the heap when posix_acl_to_cifs() writes the larger CIFS
format.
Validate the CIFS format size against the remaining buffer space and
USHRT_MAX before converting--data_count is __u16, so sizes above
USHRT_MAX truncate the on-wire packet length, causing the server to
apply a partial ACL. Replace MaxDataCount = 1000 with
min(CIFSMaxBufSize, USHRT_MAX). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Check operator stack capacity before pushing
predicate_parse() uses the first operator stack entry before processing
any opening parentheses. A push then increments top before writing.
The existing check still permits that write when top already points to
the last allocated entry, which can access beyond the operator stack.
Reject the push when top reaches the last allocated entry. |
