Export limit exceeded: 419084 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (4542 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53059 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count. | ||||
| CVE-2026-84141 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | 9.8 Critical |
| Integer overflow in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 155, Firefox ESR 153.2, Thunderbird 155, and Thunderbird 153.2. | ||||
| CVE-2026-48486 | 1 Signum-network | 1 Signum-node | 2026-09-03 | 7.5 High |
| Signum Node is a HDD-mined cryptocurrency using an energy efficient and fair Proof-of-Commitment (PoC+) consensus algorithm. Prior to version 3.9.9, an integer overflow in BlockServiceImpl.applyBlock() allowed a miner to receive an arbitrarily inflated block reward by crafting a block with a negative totalFeeCashBackNqt value. The vulnerability was introduced when the SMART_FEES hardfork (block ~1,029,000) enabled fee cash-back and burn accounting without overflow protection. This issue has been patched in version 3.9.9. | ||||
| CVE-2026-58641 | 3 Apple, Linux, Microsoft | 5 Macos, Linux Kernel, .net and 2 more | 2026-09-03 | 7.8 High |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. | ||||
| CVE-2026-18309 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP APNG File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of APNG files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29401. | ||||
| CVE-2026-18308 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP TIF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29405. | ||||
| CVE-2026-18306 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP SGI File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SGI files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29396. | ||||
| CVE-2026-18305 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP TIF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29406. | ||||
| CVE-2026-18304 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP TIF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIF files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29403. | ||||
| CVE-2026-18301 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP PSD File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PSD files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29395. | ||||
| CVE-2026-18300 | 1 Gimp | 1 Gimp | 2026-09-02 | 7.8 High |
| GIMP HDR File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29289. | ||||
| CVE-2025-70293 | 1 Denx | 1 U-boot | 2026-09-02 | 9.8 Critical |
| An issue was discovered in Denx U-Boot before 2026.04. An integer overflow vulnerability exists in function ext4fs_get_bgdtable, the size calculation can lead to under allocation and this underallocated buffer will be used in memcpy() which could lead to arbitrary code execution, a denial of service, or other unspecified impacts. | ||||
| CVE-2026-75538 | 1 Erlang | 3 Erlang/otp, Erlang\/otp, Otp | 2026-09-01 | N/A |
| An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB. This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible. This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, from 16.0 before 16.4.0.6, and from 17.0 before 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown. | ||||
| CVE-2026-9621 | 2 Rockwell Automation, Rockwellautomation | 2 Rslinx Classic , Rslinx Classic | 2026-09-01 | N/A |
| A denial-of-service security issue exists within RSLinx® Classic. The security issue stems from improper handling of a malformed packet. A crafted CIP packet can cause the RSLinx® Classic service to crash, requiring a restart of the service to recover | ||||
| CVE-2026-79902 | 3 Gimp, Gnome, Redhat | 3 Gimp, Gimp, Enterprise Linux | 2026-09-01 | 5.5 Medium |
| A flaw was found in the Seattle FilmWorks plugin in GIMP. When processing a specially crafted SFW image file, the plugin allocates a Variable-Length Array (VLA) on the stack without integer overflow checks, causing an unbounded stack allocation. This issue leads to an application crash, resulting in a denial of service. | ||||
| CVE-2026-78465 | 2 Gimp, Redhat | 2 Gimp, Enterprise Linux | 2026-09-01 | 7 High |
| A flaw was found in the file-pcx plugin in GIMP, affecting 32-bit builds only. When processing a PCX image file, the plugin calculates memory allocation sizes based on the image dimensions and the number of color planes. If a crafted file sets the number of planes to 4 alongside sufficiently large dimensions, the calculation exceeds the 32-bit integer limit and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when the plugin subsequently writes image data into the undersized buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. | ||||
| CVE-2026-82908 | 1 Msi | 1 Dragon Center | 2026-09-01 | 8.8 High |
| A vulnerability was found in MSI Dragon Center up to 2.0.155.0. Affected by this vulnerability is the function MmioWritePath in the library NTIOLib_X64.sys of the component MMIO Write Path Handler. Performing a manipulation of the argument count/elementSize results in integer overflow. The attack requires a local approach. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-82737 | 1 Ash-project | 1 Ash | 2026-09-01 | N/A |
| Integer Overflow or Wraparound vulnerability in ash-project ash lets an attacker corrupt a stored vector and crash later reads of it by submitting a vector with more than 65,535 elements. Ash.Vector.new/1 (lib/ash/vector.ex) encodes a vector as <<dim::unsigned-16, 0::unsigned-16>> followed by the element floats, packing the element count into a 16-bit field without checking its range. A list of more than 65,535 elements wraps the dimension modulo 65,536, so the encoded header records a dimension that disagrees with the number of stored floats. from_binary/1 later reads binary-size(dim)-unit(32) from the wrapped header, so every read of the corrupted value misparses and raises, denying access to the affected record. The fix rejects any vector whose dimension exceeds 65,535. This issue affects ash: from 2.14.13 before 3.32.2. | ||||
| CVE-2026-7598 | 1 Libssh2 | 1 Libssh2 | 2026-09-01 | 7.3 High |
| A security vulnerability has been detected in libssh2 up to 1.11.1. The impacted element is the function userauth_password of the file src/userauth.c. Such manipulation of the argument username_len/password_len leads to integer overflow. The attack may be launched remotely. The name of the patch is 256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to remediate this issue. | ||||
| CVE-2026-55764 | 1 Klever-io | 1 Klever-go | 2026-08-31 | N/A |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.19, Klever-Go allows a mint-role holder to bypass a finite per-nonce MaxSupply on the semi-fungible token add-quantity path. In core/kapp/systemAccount/systemAcount.go, SFTAddCirculation performed meta.Circulation += amount before evaluating whether Circulation exceeded MaxSupply, without checking for signed int64 overflow. A large positive raw Amount supplied through processSemiFungibleAddQuantity in core/kapp/kda/mint.go can wrap Circulation negative, causing the signed maximum-supply comparison to pass and crediting approximately MaxInt64 units while corrupting the on-chain counter. The fungible path is not affected because its MintedValue <= 0 guard detects the overflow. The correction uses the consensus activation flag FixMarketBuyOverflow. This issue is fixed in version 1.7.19. | ||||