| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock cloning inline extent when using flushoncommit
In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and
transaction commit when using flushoncommit") a deadlock was fixed
between reflinks and transaction commits when the fs is mounted with the
flushoncommit option. This happened when we had to copy an inline extent's
data to the destination file. However the issue was fixed only for the
case where the destination offset is 0, it missed the case when the offset
is greater than zero.
Fix this by ensuring we get i_size update whenever we copied an inline
extent's data into the destination file.
Syzbot reported this with the following trace:
INFO: task kworker/u8:3:57 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000
Workqueue: writeback wb_workfn (flush-btrfs-129)
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5402 [inline]
__schedule+0x16f9/0x5500 kernel/sched/core.c:7204
__schedule_loop kernel/sched/core.c:7283 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7298
wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline]
btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008
btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline]
btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718
extent_writepage fs/btrfs/extent_io.c:1848 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline]
btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684
do_writepages+0x32e/0x550 mm/page-writeback.c:2571
__writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764
writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056
wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241
wb_do_writeback fs/fs-writeback.c:2388 [inline]
wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428
process_one_work+0x98b/0x1630 kernel/workqueue.c:3318
process_scheduled_works kernel/workqueue.c:3401 [inline]
worker_thread+0xb49/0x1140 kernel/workqueue.c:3482
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
INFO: task syz.0.145:8523 blocked for more than 143 seconds.
Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5402 [inline]
__schedule+0x16f9/0x5500 kernel/sched/core.c:7204
__schedule_loop kernel/sched/core.c:7283 [inline]
schedule+0x164/0x360 kernel/sched/core.c:7298
wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227
__writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847
try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895
btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline]
btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371
btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822
generic_write_sync include/linux/fs.h:2663 [inline]
btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x629/0xba0 fs/read_write.c:688
ksys_write+0x156/0x270 fs/read_write.c:740
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5a0bdece59
RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59
RDX: 000000000000029f RSI: 0000200000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT
Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not
belong to the same superblock as the original file. Currently, this
validation is performed inside ext4_move_extents() by
mext_check_validity(), but only after lock_two_nondirectories() has
already acquired the inode locks. When the donor fd refers to a file
on a different filesystem (e.g., overlayfs), this late validation
creates a circular lock dependency:
CPU0 (overlayfs write) CPU1 (ext4 ioctl)
---- ----
inode_lock(ovl_inode)
mnt_want_write_file(filp)
sb_start_write(ext4_sb) [sb_writers]
backing_file_write_iter()
vfs_iter_write(real_file)
file_start_write(real_file)
sb_start_write(ext4_sb) [blocked by freeze]
lock_two_nondirectories()
inode_lock(ovl_inode) [blocked]
With a concurrent freeze operation holding sb_writers write side, this
forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits
for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock.
Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files,
it fundamentally requires both files to reside on the same ext4
filesystem. Moving the superblock check before any lock acquisition
is both semantically correct and eliminates the circular dependency
by ensuring that cross-filesystem donor fds are rejected before
sb_writers or inode locks are taken. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or ,
- sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
KCSAN report:
================================================
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: skip extent mft records in writeback to prevent deadlock
This patch fixes the ABBA deadlock between extent_lock and extent
mrec_lock triggered by xfstests generic/113, that occurs since the commit
6994acf33bae ("ntfs: use base mft_no when looking up base inode for
extent record").
Path A (inode writeback):
VFS writeback
-> ntfs_write_inode()
-> __ntfs_write_inode()
-> mutex_lock(&ni->extent_lock)
-> mutex_lock(&tni->mrec_lock)
Path B (MFT folio writeback):
VFS writeback of $MFT dirty folios
-> ntfs_mft_writepages()
-> ntfs_write_mft_block()
-> ntfs_may_write_mft_record()
-> holds one extent mrec_lock from a previous iteration
-> tries to acquire another base inode extent_lock
By removing all extent_lock and extent mrec_lock acquisition from the MFT
folio writeback path, the ABBA lock ordering is eliminated:
Path A: __ntfs_write_inode(): extent_lock -> mrec_lock
Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock
Path B is always redundant for extent records because:
1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio.
It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty
via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A.
Therefore, normal extent modifications never create a situation where
the MFT folio is dirty and Path B is not scheduled.
2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside
ntfs_mft_record_alloc(). But all identified callers in attrib.c
(ntfs_attr_add, ntfs_attr_record_move_away,
ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through
with mark_mft_record_dirty(), which triggers Path A to write the
complete record.
3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent
inodes, ensuring all dirty extents are flushed via Path A before the
base inode leaves the icache. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/mst: limit DP MST ESI service loop
The loop in intel_dp_check_mst_status() keeps servicing interrupts
originating from the sink without bound. Add an upper bound to the new
interrupts occurring during interrupt processing to not get stuck on
potentially stuck sink devices. Use arbitrary 32 tries to clear incoming
interrupts in one go.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Note: The condition likely pre-dates the commit in the Fixes: tag, but
this is about as far back as a backport has any chance of
succeeding. Before that, the retry had a goto.
(cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: vport: fix self-deadlock on release of tunnel ports
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix rcu_read_unlock() deadloop due to softirq
Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in
__rcu_read_unlock()") removes the recursion-protection code from
__rcu_read_unlock(). Therefore, we could invoke the deadloop in
raise_softirq_irqoff() with ftrace enabled as follows:
WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180
Modules linked in: my_irq_work(O)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180
RSP: 0018:ffffc900000034a8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329
RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c
R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000
R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054
FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
__is_insn_slot_addr+0x54/0x70
kernel_text_address+0x48/0xc0
__kernel_text_address+0xd/0x40
unwind_get_return_address+0x1e/0x40
arch_stack_walk+0x9c/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
__raise_softirq_irqoff+0x61/0x80
__flush_smp_call_function_queue+0x115/0x420
__sysvec_call_function_single+0x17/0xb0
sysvec_call_function_single+0x8c/0xc0
</IRQ>
Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
fixed the infinite loop in rcu_read_unlock_special() for IRQ work by
setting a flag before calling irq_work_queue_on(). We fix this issue by
setting the same flag before calling raise_softirq_irqoff() and rename the
flag to defer_qs_pending for more common. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Fix circular locking dependency in rds_tcp_tune
syzbot reported a circular locking dependency in rds_tcp_tune() where
sk_net_refcnt_upgrade() is called while holding the socket lock:
======================================================
WARNING: possible circular locking dependency detected
======================================================
kworker/u10:8/15040 is trying to acquire lock:
ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},
at: __kmalloc_cache_noprof+0x4b/0x6f0
but task is already holding lock:
ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},
at: rds_tcp_tune+0xd7/0x930
The issue occurs because sk_net_refcnt_upgrade() performs memory
allocation (via get_net_track() -> ref_tracker_alloc()) while the
socket lock is held, creating a circular dependency with fs_reclaim.
Fix this by moving sk_net_refcnt_upgrade() outside the socket lock
critical section. This is safe because the fields modified by the
sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not
accessed by any concurrent code path at this point.
v2:
- Corrected fixes tag
- check patch line wrap nits
- ai commentary nits |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: add cluster chain loop check for dir
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
After commit
746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
amdgpu started seeing the following warning:
[ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu]
...
[ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched]
...
[ ] Call Trace:
[ ] <TASK>
...
[ ] ? check_flush_dependency+0xf5/0x110
...
[ ] cancel_delayed_work_sync+0x6e/0x80
[ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu]
[ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu]
[ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu]
[ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched]
[ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu]
[ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched]
[ ] process_one_work+0x217/0x720
...
[ ] </TASK>
The intent of the verifcation done in check_flush_depedency is to ensure
forward progress during memory reclaim, by flagging cases when either a
memory reclaim process, or a memory reclaim work item is flushed from a
context not marked as memory reclaim safe.
This is correct when flushing, but when called from the
cancel(_delayed)_work_sync() paths it is a false positive because work is
either already running, or will not be running at all. Therefore
cancelling it is safe and we can relax the warning criteria by letting the
helper know of the calling context.
References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent tailcall infinite loop caused by freplace
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Defer work in bpf_timer_cancel_and_free
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Reload only IB representors upon lag disable/enable
On lag disable, the bond IB device along with all of its
representors are destroyed, and then the slaves' representors get reloaded.
In case the slave IB representor load fails, the eswitch error flow
unloads all representors, including ethernet representors, where the
netdevs get detached and removed from lag bond. Such flow is inaccurate
as the lag driver is not responsible for loading/unloading ethernet
representors. Furthermore, the flow described above begins by holding
lag lock to prevent bond changes during disable flow. However, when
reaching the ethernet representors detachment from lag, the lag lock is
required again, triggering the following deadlock:
Call trace:
__switch_to+0xf4/0x148
__schedule+0x2c8/0x7d0
schedule+0x50/0xe0
schedule_preempt_disabled+0x18/0x28
__mutex_lock.isra.13+0x2b8/0x570
__mutex_lock_slowpath+0x1c/0x28
mutex_lock+0x4c/0x68
mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core]
mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core]
mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core]
mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core]
mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core]
mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core]
mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core]
mlx5_disable_lag+0x130/0x138 [mlx5_core]
mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock
mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core]
devlink_nl_cmd_eswitch_set_doit+0xdc/0x180
genl_family_rcv_msg_doit.isra.17+0xe8/0x138
genl_rcv_msg+0xe4/0x220
netlink_rcv_skb+0x44/0x108
genl_rcv+0x40/0x58
netlink_unicast+0x198/0x268
netlink_sendmsg+0x1d4/0x418
sock_sendmsg+0x54/0x60
__sys_sendto+0xf4/0x120
__arm64_sys_sendto+0x30/0x40
el0_svc_common+0x8c/0x120
do_el0_svc+0x30/0xa0
el0_svc+0x20/0x30
el0_sync_handler+0x90/0xb8
el0_sync+0x160/0x180
Thus, upon lag enable/disable, load and unload only the IB representors
of the slaves preventing the deadlock mentioned above.
While at it, refactor the mlx5_esw_offloads_rep_load() function to have
a static helper method for its internal logic, in symmetry with the
representor unload design. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: af_bluetooth: Fix deadlock
Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:
INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__schedule+0x37d/0xa00
schedule+0x32/0xe0
__lock_sock+0x68/0xa0
? __pfx_autoremove_wake_function+0x10/0x10
lock_sock_nested+0x43/0x50
l2cap_sock_recv_cb+0x21/0xa0
l2cap_recv_frame+0x55b/0x30a0
? psi_task_switch+0xeb/0x270
? finish_task_switch.isra.0+0x93/0x2a0
hci_rx_work+0x33a/0x3f0
process_one_work+0x13a/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK> |
