| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xps: reject an out of range traffic class
Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and
dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc()
lowers dev->num_tc without touching either array.
netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and
netdev_get_prio_tc_map() returns the entry as it stands, so a leftover
entry is handed out as a traffic class >= dev->num_tc. Taking that
class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a
negative one and indexes an XPS map sized for dev->num_tc classes:
tci = j * num_tc + tc;
RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map);
attr_map[] holds nr_ids * num_tc entries and j runs over the ids named
in the mask, so a class that is not below num_tc pushes tci past the end
of the map for the last ids and the store overruns it.
Any caller that lowers num_tc leaves such entries behind, and
mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than
netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7]
still describe txq 1..7. The splat is from an XPS write to txq 2 on a
veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and
j == 6 stores one past the end of the 88-byte map:
BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954)
Write of size 8 at addr ffff88813016bc58 by task xps_oob/634
__netif_set_xps_queue (net/core/dev.c:2954)
xps_rxqs_store (net/core/net-sysfs.c:1880)
netdev_queue_attr_store (net/core/net-sysfs.c:1390)
Allocated by task 634:
__kmalloc_noprof (mm/slub.c:5439)
__netif_set_xps_queue (net/core/dev.c:2937)
The buggy address is located 0 bytes to the right of
allocated 88-byte region [ffff88813016bc00, ffff88813016bc58)
Reject a class the map has no room for. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gue: reject invalid REMCSUM offsets
The REMCSUM option carries an absolute checksum start and checksum field
offset. gue_remcsum() passes them to skb_remcsum_process(), whose
partial path stores offset - start in the u16 skb->csum_offset variable.
If offset is less than start, this underflows.
A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM
driver which trusts the metadata, leading skb_copy_and_csum_dev() to write
two bytes about 64 KiB beyond the destination buffer.
Reject reversed tuples in validate_gue_flags(), after the existing length
validation, so all GUE parsers enforce the ordering in one place. |
| WeGIA is a web manager for charitable institutions. Prior to 3.8.6, the pre-installation web/instalador/instalador.php endpoint is reachable before config.php exists and processes unauthenticated installation POST data. In the Linux reinstall flow, a crafted usuario value reaches a command executed by shell_exec(). The installer also writes attacker-controlled values into executable config.php and concatenates the database name nomebd into a CREATE DATABASE statement. Successful exploitation can execute commands as the web-server user, persist attacker-controlled PHP configuration, and alter or disrupt the application and its data. This issue is fixed in version 3.8.6. |
| A vulnerability has been found in Wavlink WL-WN530BE2-A up to M30BE2_V250604. The affected element is the function sub_12580 of the file api.cgi of the component Login Processing. The manipulation of the argument REMOTE_ADDR leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2026-09-24-841a51c6d5_tclinux.bin is sufficient to fix this issue. You should upgrade the affected component. The vendor confirms: "We confirm the finding, and it has already been addressed. In the current firmware the api=info&client=app handler no longer builds a shell command: the login script is now invoked through an argument vector (execvp) instead of system(), and the client address is length-limited and null-checked." |
| A security vulnerability has been detected in Praat up to 7.0.02. Affected is the function whisper_model_load of the file external/whispercpp/whisper.cpp of the component Model Loader. The manipulation of the argument n_dims leads to out-of-bounds write. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is a910d21a2705ef4cd16d91f29cdc8da1ab1a7221. To fix this issue, it is recommended to deploy a patch. The project maintainer confirms: "We did a quick fix (suggested fix 1) for Praat version 7.0.03, and scheduled a better fix (suggested fix 2)." |
| libzvbi through 0.2.45 contains an out-of-bounds write vulnerability in the Teletext decoder that allows attackers to corrupt memory by supplying unvalidated DRCS pixel-mode values in X/28/3 packets. Attackers can send a crafted Teletext stream decoded via vbi_decode with every slot set to DRCS_MODE_6_5_4, causing convert_drcs to overflow chars[48][60] and crash the application. |
| @runnerty/executor-decompress through 3.1.1 contains an OS command injection vulnerability that allows attackers to execute commands by supplying crafted archive file names to compress_file. Attackers who can name a file dropped into a watched directory can inject $() substitutions or unquoted shell metacharacters into shelljs exec() calls, running commands with Runnerty process privileges. |
| pypdftk through 0.5 contains an OS command injection vulnerability in fill_form(), dump_data_fields(), and pdftk_cmd_util() that builds shell commands from caller-supplied paths. Attackers controlling pdf_path or out_file can inject shell metacharacters interpreted by subprocess.Popen with shell=True to execute OS commands as the Python process. |
| libsixel before 1.8.7-r1 and 1.9.0 through 1.10.5 contains a heap out-of-bounds write vulnerability in gif_init_frame() in src/fromgif.c, which never checks the GIF transparent color index against the palette size. Attackers can supply a crafted GIF with a small color table and large transparent index, processed with a background color set, to write bytes past the palette buffer, causing heap corruption or crashes. |
| Out-of-bounds write in Active Directory Domain Services allows an authorized attacker to execute code over a network. |
| When the PCM sample array needs to grow, the RACK stack doubles a 16-bit allocation counter. Repeated doublings caused the counter to wrap to zero, resulting in a near-zero-length allocation followed by a copy of the existing samples into the undersized buffer. A remote peer can trigger the expansion by sending a sufficient number of ACKs on an established connection.
A remote attacker who can establish a TCP connection to a system using the RACK stack can trigger an out-of-bounds write of approximately 512 KB in the kernel heap possibly resulting in a kernel panic. |
| Substance3D - Sampler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Out-of-bounds write in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Out-of-bounds write in .NET Framework allows an unauthorized attacker to execute code over a network. |
| A vulnerability is in Web Server default connection ports under the process name GeoWebServer.exe . |
| An issue in Netcore B11 Enterprise-level full Gigabit 9-port shop wireless router v1.3.241114.024540 and before allows a remote attacker to execute arbitrary code via the www\cgi-bin\upgrade file |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: validate checksum_start before completing checksum
If a packet with bad checksum metadata gets into the ipv4 stack,
skb_checksum_help can corrupt the network header and cause a bunch of
mischief.
This was discovered and reported by Paulos, and has been reporoduced
by others independently since.
We really shouldn't allow such packets in, but as a defence
in depth measure, let's also check before we complete the checksum.
A more complete validation at input is forthcoming, but needs more work. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix auth_hmacs array size in struct sctp_cookie
The auth_hmacs array in struct sctp_cookie is supposed to store a complete
SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr
followed by N HMAC identifiers.
However, the array size was calculated using an extra 2 bytes instead of
sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers
are configured, the HMAC-ALGO parameter stored in the endpoint is larger
than the auth_hmacs buffer in the cookie.
As a result, sctp_association_init() copies beyond the end of auth_hmacs
when initializing the association, corrupting the adjacent auth_chunks
field. This can lead to an invalid HMAC identifier being accepted and later
cause an out-of-bounds read in sctp_auth_get_hmac().
Fix the array size calculation by including the full SCTP parameter header
size. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid
sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the
capacity limit for ep->auth_chunk_list, allowing it to hold up to
20 chunk entries (param_hdr.length up to 24). However, the copy
destination asoc->c.auth_chunks in struct sctp_cookie is only
SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16
chunks are added, sctp_association_init() memcpy overflows the
destination by up to 4 bytes.
Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching
the destination capacity. |
