| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: drain and invalidate before server-side copy/clone
cifs_file_copychunk_range() and the clone (FICLONE) path of
cifs_remap_file_range() do not serialise the destination page cache
against the server-side copy the way the other server-side range
operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range()
and smb3_insert_range()) do.
cifs_file_copychunk_range() invalidates the destination range with
filemap_invalidate_inode(), which takes and drops the mapping's
invalidate_lock internally, so the lock is no longer held when the
copychunk ioctl is issued. It also never drains in-flight netfs I/O on
the target. The clone path never takes the invalidate_lock at all (only
i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not
drain outstanding I/O.
As a result an asynchronous destination writeback can complete after the
server-side copy/clone has run and reinstate stale data over the region
just written by the server, corrupting the file. This is the same class
of corruption as commit d7d2adcd022b ("smb/client: flush dirty data
before punching a hole") and has been seen randomly in generic/363
against Windows Server.
Fix both paths to follow the established ordering: hold the target
mapping's invalidate_lock across the flush and invalidation of the
destination and the server ioctl, and call netfs_wait_for_outstanding_io()
on the target to drain in-flight writes before the ioctl is issued. Only
the target inode's invalidate_lock is required, as the source is merely
flushed and not invalidated; i_rwsem (already held via
lock_two_nondirectories()) is acquired before the invalidate_lock,
matching the VFS lock ordering. Since filemap_invalidate_inode() takes
that same lock internally, replace it with its own unmap/flush/invalidate
steps instead of calling it, and return early on a zero-length copy to
avoid a range underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and the watchdog reports a soft lockup. All reads stay
within the received skb, so the lockup is a pure remote denial of
service. A remote peer can trigger it with a crafted ASCONF-ACK on
an ADD-IP enabled association with an outstanding ASCONF (RFC 5061
section 4.1.2 requires the chunk to be authenticated, but the
predefined empty key id 0 allows the peer to compute the same
association HMAC from publicly exchanged parameters, so the gate
does not help).
The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs
no length check, letting a parameter without a complete error
header reach the consumer, which reads errhdr.cause past the end of
the parameter, an out-of-bounds read.
Reject SCTP_PARAM_ERR_CAUSE parameters shorter than
sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the
verifier, and advance the consumer iterator with the same padding
rule as the verifier to keep the two walks in lockstep. The verifier
change guarantees a complete error header in every ERR_CAUSE
parameter the consumer can see, so the consumer's asconf_ack_len
check is dropped and it returns err_param->cause directly. The
consumer padding fix is still required because odd lengths remain
valid for SCTP_PARAM_ERR_CAUSE per RFC 5061.
The issue was found by ZeroHive, a vulnerability hunting agent at
Tencent Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: add wcid publish check in mt76_sta_add
Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add
to avoid reinitializing the wcid->poll_list.
Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4.
According to the corruption information, prev->next was changed to itself.
wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2
wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b)
wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3)
slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192
list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040).
mt76_wcid_add_poll+0x95/0xd0 [mt76]
mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common]
mt7925_rx_check+0xa7/0xc0 [mt7925_common]
mt76_dma_rx_poll+0x50d/0x790 [mt76]
mt792x_poll_rx+0x52/0xe0 [mt792x_lib] |
| In OpenStack Cinder through 29.0.0, cross-project information disclosure can occur in the Messages API. A non-admin user with the project-scoped 'member' or 'reader' role making the Block Storage API v3.3 "List messages" call finds the non-expired user messages for other projects included in the response, resulting in the leakage of UUIDs of resources owned by other projects, in addition to the user message about the other projects' resources (which, by design, are sanitized generic messages). All Cinder deployments are affected. |
| filelock is a platform-independent file lock for Python. From 3.20.4 until 4.0.9, ReadWriteLock and AsyncReadWriteLock versions from 3.20.4 resolve the lock path and pass it to SQLite without rejecting a final symbolic link, allowing another local user who can create names in the lock directory to redirect database creation and locking or split mutual exclusion between targets. This issue is fixed in version 4.0.9. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event->pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: initialize gigantic bootmem hugepage struct pages earlier
Gigantic bootmem HugeTLB pages are currently initialized from
hugetlb_init(), but page_alloc_init_late() runs earlier and walks
pageblocks to determine zone contiguity.
If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can
observe still-uninitialized struct pages through
__pageblock_pfn_to_page(). This may not trigger an immediate failure, but
it can make set_zone_contiguous() compute the wrong zone contiguity state.
If extra poisoned-page checks are added in this path, such as
PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot
panic.
Initialize gigantic bootmem HugeTLB struct pages from
page_alloc_init_late(), before zone contiguity is evaluated, so later page
allocator setup only sees valid struct page state. This also makes the
initialization order more natural, as struct pages should be initialized
before later code inspects them. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Fix uncore_box ref/unref ordering
In uncore_event_cpu_online(), uncore_box_ref() was called before
uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0,
but box->cpu is still -1 at that point because uncore_change_context()
has not run yet. As a result, the box is never initialized on the
first CPU to come online in a die, leaving it permanently
uninitialized in the single-CPU-per-die case.
Thus, box->refcnt is one count below the true value, and in the CPU
offline path, the box will be torn down on the second-to-last CPU.
In uncore_event_cpu_offline(), uncore_box_unref() was called after
uncore_change_context(), so box->cpu is already -1 when the collector
CPU goes offline, which prevents it from tearing down the box.
Fix by swapping the call order in both paths so that
uncore_box_{ref,unref}() runs at the point where box->cpu reflects
the correct context.
Move allocate_boxes() out of uncore_box_ref() to enable this
reordering. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Clean up channels on setup failure
scmi_channels_setup() can fail after the common BASE channel or earlier
protocol channels have already been registered in the TX/RX IDRs.
Route this failure through the existing channel cleanup label so the
transport channels, transport devices and IDR state created before the
failure are released before the probe error path frees the SCMI instance
ID. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: check import_ubuf() return value
import_ubuf() can fail if the address range (provided by the userspace
ublk server) is outside the allowed user address space. Return that 0
bytes were copied if import_ubuf() fails rather than passing an
uninitialized struct iov_iter to ublk_copy_user_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
