Export limit exceeded: 11737 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11737 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74733 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. | ||||
| CVE-2026-74599 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: always stabilise against page table freeing using init_mm Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). The first point at which ptdump can race kernel page table freeing is commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table"), so we target this in the Fixes tag. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72336 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon->l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-72009 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. | ||||
| CVE-2026-68426 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix stale skb->prev after async crypto steals a GSO segment skb_gso_segment() leaves the segment list head with ->prev pointing at the last segment, an invariant validate_xmit_skb_list() relies on when it sets its tail pointer (tail = skb->prev). When validate_xmit_xfrm() walks a GSO list and some segments are stolen by async crypto (->xmit() returns -EINPROGRESS), those segments are unlinked from the list but the head ->prev is never updated. If the last segment is the one stolen, the returned head still has ->prev pointing at it, even though it is now owned by the crypto engine and may be freed. validate_xmit_skb_list() later does tail->next = skb, writing through that stale pointer -- a use-after-free. Repoint skb->prev at the last retained segment before returning. | ||||
| CVE-2026-68409 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain. | ||||
| CVE-2026-68399 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone(). | ||||
| CVE-2026-68381 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: pin conn during async oplock break notification smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn pointer in an async ksmbd_work and then queue that work on ksmbd-io. The work only increments conn->r_count, which prevents teardown from passing the pending-request wait after the increment, but it does not pin the struct ksmbd_conn object. If connection teardown races with an oplock break notification, the last conn reference can be dropped before the queued worker finishes. The worker then uses the freed conn in ksmbd_conn_write() and ksmbd_conn_r_count_dec(). Take a real conn reference when publishing the conn pointer to the async work item, and drop it after the notification work has decremented r_count. Apply the same lifetime rule to lease break notification, which uses the same work->conn pattern. | ||||
| CVE-2026-68290 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released safely. The fix was tested against the linked reproducer. | ||||
| CVE-2026-68081 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path doesn't use nested_vmx_vmexit() as that API is intended to be used if and only if L2 is active, and the open coded equivalent neglects to put the vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages (and/or mappings) if L1 retries VMLAUNCH/VMRESUME. Note, the !from_vmenter scenario doesn't suffer the same problem, as vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry getting vmcs12 pages. | ||||
| CVE-2026-64481 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown. | ||||
| CVE-2026-64424 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material. | ||||
| CVE-2026-64348 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-64341 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2026-64305 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - protect service table iterations with service_lock The service_table list is protected by service_lock when entries are added or removed (in adf_service_add() and adf_service_remove()), but several functions iterate over the list without holding this lock. A concurrent adf_service_register() or adf_service_unregister() call could modify the list during traversal, leading to list corruption or a use-after-free. Fix this by holding service_lock across all list_for_each_entry() iterations of service_table in adf_dev_init(), adf_dev_start(), adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(), adf_dev_restarted_notify(), and adf_error_notifier(). The lock ordering is safe: callers of the static helpers (adf_dev_up() and adf_dev_down()) acquire state_lock before service_lock, and no event_hld callback or service_lock holder ever acquires state_lock in the reverse order. | ||||
| CVE-2026-64136 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked(). | ||||
| CVE-2026-64077 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: move to two-stage removal scheme Like previous patches for x_tables, follow same pattern in ebtables. We can't reuse xt helpers: ebt_table struct layout is incompatible. table->ops assignment is now done while still holding the ebt mutex to make sure we never expose partially-filled table struct. | ||||
| CVE-2026-64017 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. | ||||