Export limit exceeded: 26138 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26138 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63930 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). | ||||
| CVE-2026-63931 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | ||||
| CVE-2026-63932 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf. | ||||
| CVE-2026-63933 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | ||||
| CVE-2026-63934 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: itg3200: fix i2c read into the wrong stack location itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer. | ||||
| CVE-2026-63935 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: nxp-sar-adc: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero or a negative value to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Also prevent unsigned integer underflow when the computed cycle count is smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to a huge value. | ||||
| CVE-2026-63936 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized. | ||||
| CVE-2026-63943 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length. | ||||
| CVE-2026-63948 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. | ||||
| CVE-2026-63949 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. | ||||
| CVE-2026-63950 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one Initialize nr_pages to 1 at the start of each loop iteration, like folio_referenced_one() does. Without this, nr_pages computed by a previous folio_unmap_pte_batch() call can be reused on a later iteration that does not run folio_unmap_pte_batch() again. mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call madvise(MADV_FREE), then make the last page device-exclusive via HMM_DMIRROR_EXCLUSIVE. Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will first clear the first 15 out of 16 entries mapping the lazyfree folio. This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets reused on a device-exclusive pte, thus potentially corrupting folio refcount/mapcount. At the moment, I have a userspace program which can make the kernel spit out a trace, but the blow up is in folio_referenced_one(), because there are existing bugs in the interaction between device-private and rmap (which too I am investigating). I did a one liner kernel change to avoid going into folio_referenced_one(), and the kernel blows up at folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted. Note that the bug is there not since file folio batching but lazyfree folio batching, since device-exclusive only works for anonymous folios. Userspace visible effect is simply kernel crashing somewhere due to refcount/mapcount corruption. | ||||
| CVE-2026-99166 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted] | ||||
| CVE-2026-99165 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. | ||||
| CVE-2026-99157 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. | ||||
| CVE-2026-99155 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: xen/scsifront: Check for a NULL shadow entry on a backend response scsifront_do_response() validates the rqid in a backend response against VSCSIIF_MAX_REQS before using it to index info->shadow[], but then dereferences the entry to test ->inflight without checking that the slot is populated. Shadow slots are NULL before a command is submitted (the host private area is zeroed at allocation) and are reset to NULL in _scsifront_put_rqid() once a request completes, so an in-range rqid that does not correspond to an outstanding request makes the frontend dereference a NULL pointer. A malicious or buggy backend can thus crash the guest by returning a response whose rqid is in range but not in flight -- for example a spurious response before any command has been issued, or a duplicate of one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots, so before the first command every in-range rqid selects a NULL slot. Reject a response whose shadow slot is not populated. | ||||
| CVE-2026-72416 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_compat: ebtables emulation must reject non-bridge targets xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so on. ebtables targets return incompatible verdicts: EBT_ACCEPT, EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC. ebtables doesn't permit this since 11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets") but that commit missed the nft_compat layer. | ||||
| CVE-2026-43115 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ] | ||||
| CVE-2026-31568 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add missing secure storage access fixups for donated memory There are special cases where secure storage access exceptions happen in a kernel context for pages that don't have the PG_arch_1 bit set. That bit is set for non-exported guest secure storage (memory) but is absent on storage donated to the Ultravisor since the kernel isn't allowed to export donated pages. Prior to this patch we would try to export the page by calling arch_make_folio_accessible() which would instantly return since the arch bit is absent signifying that the page was already exported and no further action is necessary. This leads to secure storage access exception loops which can never be resolved. With this patch we unconditionally try to export and if that fails we fixup. | ||||
| CVE-2025-40328 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_close_cached_fid() find_or_create_cached_dir() could grab a new reference after kref_put() had seen the refcount drop to zero but before cfid_list_lock is acquired in smb2_close_cached_fid(), leading to use-after-free. Switch to kref_put_lock() so cfid_release() is called with cfid_list_lock held, closing that gap. | ||||
| CVE-2025-38728 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb3: fix for slab out of bounds on mount to ksmbd With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] | ||||